Let’s say you want to install Car Navigation in your car but don’t know-how. You head over to Google, type “How to Install an Aftermarket Navigation System in Your Car,” and In this article Brisbane’s Best Car Buyers explain here about installing an aftermarket navigation system comes up at Index. Once you click on the article, it shows a large image of the inside of a car and the navigation system visible on the dashboard (see below). Several paragraphs further into the article, there’s a quick call-to-action telling you that they provide step-by-step instructions in the footer of their page (in case you want more detailed information).
Reasons to Install an Aftermarket Navigation System
If you’re considering installing an aftermarket navigation system in your car, you should consider a few things. First and foremost, you’ll need to decide if the investment is worth it. There are several reasons someone might want to install a navigation system, and we’ve listed a few below.
1. You frequently travel to new or unfamiliar places.
If you find yourself constantly traveling to new places, whether for work or pleasure, a navigation system can be a huge help. Rather than having to fumble around with paper maps or rely on your smartphone’s GPS (which can be unreliable), you can input your destination into your navigation system and let it do the rest.
2. You want to find your way even if there’s no cell service.
One of the nice things about most navigation systems is that they don’t rely on cellular service to function. This means that even if you’re in a remote location with no cell service, you’ll still be able to get where you’re going.
3. You want real-time traffic information.
Another advantage of navigation systems is that they often come with real.
Steps of Installing an Aftermarket System
Assuming you have all the hardware and software needed for installation, installing an aftermarket GPS navigation system in your car is relatively straightforward. Here are the basic steps:
1. Mount the GPS unit conveniently on your dash or windshield.
2. Run the power cable from the unit to a suitable 12v power source in your vehicle (usually the cigarette lighter socket).
3. Connect the GPS unit to your car stereo system. This can be done via an aux input or by splicing it into the wire harness for your head unit.
4. If necessary, calibrate the GPS unit according to its instructions. This step is usually only required if you install a new GPS antenna.
5. That’s it! Your new GPS navigation system should now be up and running.
Benefits of Installing an Aftermarket Navigation System
There are many benefits to installing an aftermarket navigation system in your car. Perhaps the most obvious benefit is that it can help you get around unfamiliar areas more easily. A navigation system can be a massive time-saver if you constantly travel to new places. Additionally, a navigation system can help you avoid traffic jams and other delays, and it can also be a lifesaver if you find yourself stranded in an unfamiliar area.
Another great benefit of having a navigation system installed in your car is that it can increase the resale value of your vehicle. If you ever decide to sell your car, potential buyers will see that it has a navigation system and will be willing to pay more.
Finally, having a navigation system in your car can make driving more enjoyable. It’s fun to be able to see where you are and plan your route before you even start driving. If you’re the type of person who enjoys gadgets and trying new things, installing a navigation system in your car is worth considering.
Troubleshooting Tips and Advice
- If you’re having trouble installing your aftermarket GPS navigation system, you can try a few things:
- Make sure that all the connections are secure and tight.
- Check the fuse box to see if there is a blown a fuse. If so, replace the fuse and try again.
- If the problem persists, consult a professional for assistance.
Reverse signal wire connection
Many navigation systems also connect to the vehicle’s reverse (or back-up light) signal wire — this connection tells the navigation system when the vehicle is traveling in reverse. If this wire is not hooked up, then the vehicle direction will not track properly, and the navigation system won’t be able to do its job.
The most common way to do this is to connect to the reverse light wire right at the tail light. You’ll need to check each wire that goes into the tail light with a multimeter. Connect the multimeter to a wire, have someone put the car in reverse (while keeping the brake engaged, of course), then see if you get a 12-volt reading. Repeat this process with each wire until you find the right one. (Note: If you get a 12-volt reading, make sure it’s because you’ve found the reverse wire, not the brake wire. You’ll know it’s the brake wire if you get a reading as soon as the brake is pressed.)
The reverse wire can sometimes be found under the dash or under the hood, but you’ll have to consult your vehicle’s wiring diagram carefully in order to identify it correctly. Tapping into it at the taillight tends to be much easier.
Position the System
You need to install the unit in close proximity to your radio. It comes with a CPU and this requires that it be attached behind the Dashboard. Make sure it doesn’t interfere in any way with your movements behind the wheel. It’s necessary for you to remove the dashboard around the stereo system and loosen the wires while taking note of which wire goes where.
Sell8 one of the best used car buyers in Brisbane where you can also get free used car valuation online. We are explain here about GPS navigation system is a great way to get from point A to point B without hassle. With so many options on the market, it’s hard to know which one is right for you. We hope our tips have helped you choose the best aftermarket GPS navigation system for your car and shown you how to install it properly. If you have any questions, feel free to leave them in the comments below, and we’ll be happy to help!